CONDUCTIVE REWORK SYSTEMS

PRC 2000/E The Benchtop Factory

PRC 2000/E - The Benchtop Factory. The thermal management center powers and controls three SensaTemp handpieces simultaneously for safe, rapid installation and removal of virtually all surface mount and thru-hole components. Tips sold separately

Features

Universal SMT component installation and removal
Self-Contained solder cream dispensing
Multilayer repair capability
Continuous automatic calibration
Automatic tip offset compensation system
Pik-Vac Component Handling Wand

Part Numbers
115v 8007-0132
230v 8007-0133

Features & Specifications

Unit:	PRC 2000 PRC 2000E
Power Requirements:	115VAC, 60Hz, 230VAC, 50/60Hz, 400 Watts maximum 365 Watts maximum
Dimensions:	175mm H x 350mm W x 230mm D 175mm H x 350mm W x 230mm D (6.9" H x 13.75" W x 9.25" D) (6.9" H x 13.75" W x 9.25" D)
Weight:	Approx. 13 Kg (30 lbs.) Approx. 13 Kg (30 lbs.)
Handpiece Specs:
Tip to ground resistance:	2 ohms or less
Temperature stability:	° 1.1°C (° 2°F) at idle from set tip temp.
Tip Temperature Range:	38° to 482°C (100° to 900°F) nominal
Vaccuum and Air Vacuum Rise Time:	200ms average as measured by PACE Process Monitor
Vaccuum:	51 cm Hg. (20 in. Hg.) nominal
Pressure:	.48 Bar (7 p.s.i.) nominal at maximum setting
Airflow:	13 SLPM (0.46 SCFM) maximum